India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia
China
Europe
Korea
Latin America

Find a Dealer

E19 Compact Excavator

Specifications & Options

E19

Close/Open all PDF version
Operating weight with cab and bucket (ISO 6016)
1,885 kg
Transport mass (no attachment)
1,768 kg
Weight reduction with canopy
-96 kg
Additional weight for long dipperstick
6 kg
Additional weight for long dozer blade
9 kg
Additional weight for counter weight
41 kg
Ground pressure with rubber tracks
32.4 kPa
(A)
Bucket pivot angle
196 °
(B)
Maximum reach of working equipment
4,084 mm
(B*)
Maximum reach of working equipment, long dipperstick
4,257 mm
(C)
Maximum reach at ground level
4,039 mm
(C*)
Maximum reach at ground level, long dipperstick
4,214 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,542 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
1,561 mm
(E)
Maximum blade height
220 mm
(F)
Maximum blade depth
204 mm
(G)
Maximum height of working equipment with dipperstick retracted
2,564 mm
(H)
Maximum bucket tooth height
3,573 mm
(H*)
Maximum bucket tooth height, long dipperstick
3,701 mm
(I)
Maximum dump height
2,566 mm
(I*)
Maximum dump height, long dipperstick
2,693 mm
(J)
Maximum depth of vertical wall which can be excavated
1,948 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,115 mm
(K)
Maximum digging depth
2,385 mm
(K*)
Maximum digging depth, long dipperstick
2,565 mm
()
(* Dentoes values which long dipperstick installed)
Thu May 24 11:10:19 CEST 2018
(A)
Blade height
235 mm
(B)
Clearance, upper structure to ground line
419 mm
(C)
Ground line to top of engine cover
1,340 mm
(D)
Length of track on ground
1,114 mm
(E)
Machine centre line to blade
1,045 mm
(F)
Minimum radius in travel position
2,832 mm
(G)
Overall length of track assembly
1,476 mm
(H)
Overall length in travel position
3,831 mm
(H*)
Overall length in travel position, long dipperstick
3,812 mm
(I)
Track lug height
25 mm
(J)
Blade width
980 mm
(J*)
Blade width (extensions extended)
1,360 mm
(K)
Height
2,299 mm
(L)
Track width
230 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
433 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
589 mm
(O)
Minimum turning radius
1,154 mm
(P)
Swing clearance, rear
1,009 mm
(Q)
Working width at maximum right-hand rotation
1,801 mm
(R)
Working width at maximum left-hand rotation
1,645 mm
Make / model
Yanmar / 3TNV74-PBC (Stage V)
Fuel
Diesel
Number of cylinders
3
Displacement
993 cm3
Maximum power @ 2400 rpm (ISO 14396)
11 kW
Maximum torque @ 1800 rpm (SAE J1995)
50.2 Nm
Pump type
Dual piston pump with gear pump
Total hydraulic capacity
41.3 L/min
Piston pump capacity
30 L/min
Auxiliary (AUX1) flow
30 L/min
Auxiliary (AUX2) flow
15 L/min
Auxiliary (AUX1) relief
180 bar
Auxiliary (AUX2) relief
179 bar
Digging force, dipperstick (ISO 6015)
10,371 N
Digging force, long dipperstick (ISO 6015)
9,279 N
Digging force, bucket (ISO 6015)
20,835 N
Drawbar pull
19,380 N
Travel speed, low range
2.7 km/h
Travel speed, high range
4.3 km/h
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
8.4 RPM
Fuel reservoir
19 L
Hydraulic reservoir
13.9 L
Noise level LpA(EU Directive 2006/42/EC)
79 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.9 ms-2
Hand-arm vibration (ISO 5349–1)
1.8 ms-2
  • 230 mm rubber track
  • 980 mm dozer blade with two 190 mm blade extensions
  • Battery disconnect switch
  • Control console locks
  • Cupholders
  • Double acting auxiliary hydraulics with quick couplers
  • Engine monitor with auto shutdown
  • Exposed counterweight with 4 mm steel tailgate
  • Foldable and ergonomic travel pedals
  • Full fuel warning alarm
  • Horn
  • Hydraulic and travel control lockout
  • Hydraulic joystick controls
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Retractable seat belt
  • Storage compartment
  • TOPS/ROPS/FOPS canopy (1)
  • Two-speed travel
  • Upper structure four point tie down
  • Water separator
  • Work light (boom)
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • Demolition package (boom, arm, bucket cylinder covers & HD travel hoses guard)
  • Object handling package (Valves, OWD, Lifteye)
  • TOPS/ROPS cab w/ heater
  • Long dipperstick w/ clamp eyes
  • Long dozer blade
  • AUX1 direct return to tank
  • AUX2 hydraulics
  • AUX1/AUX2 on arm
  • Keyless ignition
  • Travel motion alarm
  • AM/FM MP3 radio
  • Additional halogen lights
  • LED lights set
  • Beacon
  • Special application kit
  • L/R mirrors
  • Fire extinguisher
  • Hydraulic clamp
  • Klac C and MS01 couplers
  • Comfort package (Superior seat for canopy or Cloth susp. seat for cab, Autospeed shift, Aux and Off-set pilot control)
  • Performance package (HD travel motors, add. counterweight)
  • Grease Gun w/ holder

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.